52CC/71CC Auger Post Hole Gas Powered Earth Auger Digger Fence Ground+3 Drills

Description

Type1:71 cc Engine The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 71cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks. Ergonomically designed, it is accurate, easy to use and economical. With this tool, you will be able to perform professional quality work. The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears. Technical Details: Engine: Single Cylinder, 2-stroke, air-cooled Cylinder capacity : 71cc Fuel mix: 25/1 Bit length : 31" Safety: Bit Lock Power：3.2kw Carburetor with pump Easy starting system (cord starter).
52CC/71CC Auger Post Hole Gas Powered Earth Auger Digger Fence Ground+3 Drills
52CC/71CC Auger Post Hole Gas Powered Earth Auger Digger Fence Ground Drill Kit
Type1:71 cc Engine
The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc.
Equipped with a 71cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks.
Ergonomically designed, it is accurate, easy to use and economical.
With this tool, you will be able to perform professional quality work.
The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less likely to shear gears.
Technical Details:
Engine: Single Cylinder, 2-stroke, air-cooled
Cylinder capacity : 71cc
Fuel mix: 25/1
Bit length : 31"
Safety: Bit Lock
Power：3.2kw
Carburetor with pump
Easy starting system (cord starter). Centrifugal clutch
Change bits quickly and easily
Weight : 10.85 Kg. (without bit)
Accessories:
Fuel Mixing Bottle
Toolkit for assembly
Type2:52 cc Engine
:
52CC Gas Earth Auger Post Hole Digger Garden Holing Fence Post Digging Machine
Description
Are you still laboriously digging holes manually? Maybe you can try our two-stroke gas-powered digging machine. The machine is made of sturdy and hard metal, equipped with a 52cc gasoline engine with a rotational speed of 8500RPM, so it works very efficiently. It can help you quickly dig holes in the ground, and used for quickly drilling holes into the earth for fence posts, poles, trees, shrubs, etc.
Key Features
Stable Operation:
Our digging machine is two-stroke powered, it doesn't pull cylinders or stall easily even when the temperature is high.
High Efficiency:
This digging machine is equipped with a powerful 52cc two-stroke gasoline engine. It is rated at 8500RPM and has a power of 1.9W/7500rpm, so it operates very efficiently.
Sturdy and Durable:
This digging machine is made of sturdy and durable metal that won't easily damage. Also, it has a straight-through gearbox, which is unlike the model with the side-mounted engine. The straight-through design is much more robust and less likely to shear gears.
Ergonomic Design
: This drill is ergonomically designed with dual ergonomic handles. Dual handles help you operate the machine more stably. Besides, the two handles are also convenient for one-person or two-person operation.
Good Heat Dissipation:
We have designed many enlarged cooling holes on the engine shell to help dissipate heat quickly and timely. This not only extends the life of the machine but also ensures that it does not stall even after long working hours.
Easy to Operate:
This digging machine is hand-held control with a one-button starting handle and a stop switch. It has a throttle switch on the engine and a stop switch on one handle. You can easily open and close the machine with these two switches. In addition, you can control the machine with both hands, which is safer and more convenient to operate.
Portable:
This digging machine is very compact, so it is easy to carry around. The two handles are also convenient to carry by hand. So it is easy for you to take it outdoors to work.
Versatile:
This machine can be used for planting and drilling, fence piling, greenhouse piling, afforestation, optical cable poles, tree fertilizing holes, ice fishing, etc.
Guaranteed Customer Service:
We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.
Details
Throttle Switch:
This machine has the throttle switch on one handle. You can switch off the engine after usage. It ensures the operation is easier and safer.
Fuel Tank:
This machine has a fuel tank on the engine to facilitate you to store enough fuel to use.
Oil Bubble:
There is an oil bubble to check whether the oil has been supplied or not. Press the oil bubble a few times before starting, and see that there is oil in and out of the oil pipe, which proves that the oil has been supplied.
Application
This machine can be used for planting and drilling, fence piling, greenhouse piling, afforestation, optical cable poles, tree fertilizing holes, ice fishing, etc. It is suitable for use on farms, parks, gardens, yards, fields, etc.
Specification
Color: Orange and Black
Engine: Single Cylinder, 2-stroke, Air-cooled
Cylinder Capacity : 52cc
Fuel Mix: 25/1
Power: 1.9W/7500rpm
Type: Carburetor with pump.
Feature: Easy Starting System (Cord Starter).
Clutch: Centrifugal clutch
Rotational Speed: 8500RPM
Horsepower: 2.4 ps
Product Size: 50*21*34cm/19.69*8.27*13.39inch
Net Weight : 10.35kg/22.82lbs
Package Included
1* Digging Machine ( Drill Bits Not Included)
1* Funnel
1* Starting Handle
1* Oil port
5* Hardware Tools
Notes
You should fill the fuel tank with mixed oil (gasoline: two-stroke engine oil=25:1). Remember to add butter to the gearbox.
Pull the starter quickly when starting, don't stop midway when pulling.
Start the machine before the throttle switch opens.
Press the oil bubble a few times before starting. If the oil pipe has oil in and out, it suggests that the oil has been supplied.
When cold starting the machine, close the damper first, then reopen it, so that you can run it normally.
Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
Type3:4'' 6'' 8'' Drill Bits only
3 bits: 4", 6" and 8".
Extension Bar: 12".
Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.
Type4:71 cc Engine + 4'' 6'' 8'' Drill Bits
Accessories:
3 bits: 4", 6" and 8".
Extension Bar: 12".
Fuel Mixing Bottle.
Toolkit for assembly.
Type5: 52 cc Engine + 4'' 6'' 8'' Drill Bits
Note: When using the hand puller, it needs to be buffered. Do not pull it all at once, just pull it to two thirds. Be sure to mix gasoline and two-stroke engine oil before adding it. The ratio is gasoline: two-stroke engine oil = 25:1
Start steps:
1. Please remember to close the air door and then pull the starter (don’t forget this step, otherwise you will not be able to ignite when you dead lift)
2. Pull the rope starter 3-5 times, the total length of the rope is 70cm, and the safety distance is 30-50cm. If the safety distance is exceeded, the rope will be broken, not the longer the rope is, the better
3. After the start is successful, remember to open the damper (not to pull the starter when opening the damper. When the damper is opened, too much air enters and there is too little oxygen, it is difficult to start, so pull the starter when the damper is closed.After the machine starts successfully, open the damper.
Pulling the starter to the end of 70cm will break the rope; the safety distance is 30-50cm, and pulling the rope hard will cause the rope to break. After breaking, you need to buy the starter again.
Please keep the choke to on position when the machine is in use!
The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc.
Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks.
Ergonomically designed, it is accurate, easy to use and economical.
Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.
With this tool, you will be able to perform professional quality work.
The Earth Auger has a straight through gearbox, unlike models with a side mounted engine, the straight through design is much more robust and less
likely to shear gears.
Technical details:
Engine: Single Cylinder, 2-stroke, air-cooled.
Cylinder capacity : 52cc.
Fuel mix: 25/1.
Bits : 4", 6" and 8".
Bit length: 31".
Safety: Bit Lock.
Power: 1.9KW/7500rpm
Carburetor with pump.
Easy starting system (cord starter). Centrifugal clutch.
Change bits quickly and easily.
Weight : 10.35 Kg. (without bit).
horsepower: 2.4 ps
Accessories:
3 bits: 4", 6" and 8".
Extension Bar: 12".
Fuel Mixing Bottle.
Toolkit for assembly.
Type6:(2.3HP)52 cc Engine + 3xDrill Bits
Description:
The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts,
poles, trees, shrubs etc.
Equipped with a 52cc gasoline engine, the auger can be handled by one or two people easily for
a wide variety of tasks.
Ergonomically designed, it is accurate, easy to use and economical.
Supplied with bits of 4", 6" & 8", the auger can drill holes of various diameters.
With this tool, you will be able to perform professional quality work.
The Earth Auger has a straight through gearbox, unlike models with a side mounted engine,
the straight through design is much more robust and less likely to shear gears.
Technical details:
Engine: Single Cylinder, 2-stroke, air-cooled.
Cylinder capacity : 52cc.
Fuel mix: 25/1.
Bits : 4", 6" and 8".
Safety: Bit Lock.
Power：1.7W/8500rpm
Carburetor with pump.
Easy starting system (cord starter). Centrifugal clutch.
Change bits quickly and easily.
Weight : 11.6 Kg. (without bit).
Accessories:
3 bits: 4", 6" and 8".
Extension Bar: 12".
Fuel Mixing Bottle.
Tool kit for assembly.
The attached manual is a general version of a variety of products, so the accessories and parameters introduced will be slightly different. The product you received is complete and correct. If you have any questions about installation/operation, please contact the seller for assistance.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Destination never sent to or arrived
Canarias Island
Note
Do not send to the Canary Islands
Transportation does not include
canarias
Item location
CA /NJ /Austell
shipping notice
Can not ship to Puerto Rico,Alaska/Hawaii
Feature 6
Easy installation
Feature 4
Trouble-free Installation
Feature 2
Special Fashion Design
Matetial 1
high quality & Duable
Feature 1
Stable characteristic, high reliability
Note:
Do not send to the Canary Islands
Custom Bundle
No
Features
High quality w/ warranty❤
Brand
Unbranded
MPN
Does Not Apply
Fuel mix
25/1.
Bits
4", 6" and 8".
Bit length
31".
Model
Does not apply
Power Source
Gasoline
Engine Type
2-Stroke
Assembly Required
Yes
Voltage
Gasoline Powered
Fits Hitch Category
1
Compatible Equipment Type
/
Compatible Equipment Make
Universal
Hook Up
Drawbar
Bundle Description
Optional
Modified Item
No
Modification Description
/
California Prop 65 Warning
/
Country/Region of Manufacture
China
On Nov 9, 2022 at 17:50:55 PST, seller added the following information: